| Customization: | Available |
|---|---|
| Type: | Volumetric Filling Machine |
| Automatic Grade: | Automatic |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| EQUIPMENT TYPE | Full automatic |
APPLICATION FOR BOTTLE |
Round or square bottle Volume 200 - 2000ml Diameter: Φ50~120mm Bottle height:160~320mm Diameter of bottle mouth: Φ25~38mm |
| CAPACITY PER HOUR | 2000~24000BPH |
| GUARANTEE | Free warranty since12 months after installation & commissioning, or 15 month after delivery date |
| AFTER SERIVCE | Life- long maintenance |
|
1.Washing part Composes of bottle washing clamp, upper rotary plate, guide rail, water distributing plate, shield, water spraying device, water tray etc. Bottle washing clamp rotates with the upper rotary plate, and open the bottle mouth clamp with elastic distortion when contacting the bottle feeding star wheel, which can clamp the bottle neck, then overturns at 180° along the guide rail, bottle mouth may become downwards for cleaning and drying the bottle with water, then overturn for 180°, bottle mouth becomes upwards and then conveyed with the star wheel; shield can prevent sprinkling of cleaning water; water distributing plate can deliver the cleaning water from the still parts to the rotary parts. |
|
2.Filling part Mainly consist of supporting parts, protuberant wheel, main liquid pipe component, cylinder part, filling machine pipe, elevator-cylinder, filling valve, controlling ring parts, four directions distributor and down distributor, etc. It is mainly used to filling the materials into the bottle. The spare parts touching materials are all made of stainless steel material and special material, they are up to the food security requirements. When a bottle is lifted to a valve by elevator-cylinder, the inspection device will find the bottle. The air valve will open after receive the bottle signal, CO2 pipes begin to connect until the air pressure is same both in the bottle and the cylinder, then starts filling, the materials filled in the bottle exhausts the CO2 which is back to the cylinder through pipes. When the lifting liquid level seals the pipe and the pressure in the bottle is larger than that in the cylinder, the filling stops. After filling, the off valve will shut the filling machine. The CO2 stored in bottle neck then will be exhausted slowly through exhausting protuberant wheel. (exhausting must be slow, otherwise bubbles will appear.) |
|
3.Capping part composes of cap separating mechanism, capping machine and cap arranging mechanism. Bottle is conveyed into the capping machine with 3# star wheel and then is clamped with the bottle clamping block; the cap is arranged by the cap arranging mechanism and then is delivered to the cap separating mechanism from the lower cap tank; cap separating mechanism can separate the caps, and capping head may ascend and remove the cap and press it onto the bottle mouth with cam; under the drive of gear, capping head tighten the cap on the bottle mouth along the shaft, and keep constant capping moment; the well capped bottle is delivered out with 4# star wheel. The capping machine is connected with cap separating mechanism, lower cap tank, cap arranging mechanism with harmonious combination through several movements for delivering bottle, delivering cap, holding cap and capping. |
|
1.RO WATER TRATMENT SYSTEM •Stainless steel high pressure film shell •All kinds of capacity indicator, pressure indicator, electricity magnetic valve, balance device and pipe valve system •Online type pressure auto self-protection device •Online type electricity indicator (with stable compensation) •System safe protecting and alarm system •Stainless steel frame Choose the above equipment according to your Raw water report. |
|
2.BOTTLE BLOWING MACHINE Full automatic blow molding machine is suitable for producing PET plastic containers and bottles in all shapes. It is widely used to produce the carbonated bottle, mineral water, pesticide bottle oil bottle cosmetics, wide-mouth bottle and hot fill bottle etc. Choose the above equipment according to your bottle design and PET preforms. |
|
3.CARBONATED SOFT DRINK PRE-PROCESS SYSTEM 1 - High-shear emulsifying tank + Plate heat ex-changer 2 - Mixing tank 3 - Carbonated soft drink mixer+Refrigeration unit 4 - CIP cleaning system Choose the above equipment according to capacity. |
|
|
|
4.LABELING MACHINE Optional Equipment: 1)Heat shrink sleeve labeling machine 2)OPP Hot glue melt labeling machine 3)Self-adhesive labeling machine Choose the above equipment according to your bottle design and label material. |
|
4.PE FILM SHRINK WRAPPING PACKAGE MACHINE Optional Equipment: 1)PE film shrink wrapping package machine 2)Half-Tray carton Shrink wrapping package machine 3)Carton package machine Choose the above equipment according to your requirement and Packing material. |
• Your inquiry related to our product & price will be replied within 24hours
• Well-trained & experienced staff are to answer all your inquiries in English and Chinese
• Working time: 8:30am ~6:00pm, Monday to Friday(UTC+8).
• OEM & ODM projects are both available
• Your business relationship with us will be confidential to any third party.
• Good after-sale service offered, please get back to us if you got any questions.
Contact:
Bobby Liu
Zhangjiagang LUYE Machinery Co.,Ltd
TEL / : +86 13773224489
Http://luyepackaging.en.made-in-china.com
Welcome To Visit ZhangJiaGang LUYE Machinery CO.,LTD
){kind=link}